UV-INT140 energy meter is a kind of high-quality, high-precision UV energy meter. Used to measure the different light sources under certain conditions, irradiation energy value, the production process is extremely important UV curing quality monitoring equipment, is able to achieve good control and consistency of product quality cured essential tool. Spectral range of UV energy is measured 250-410nm (nanometers) ultraviolet wavelength of optimum induction 365nm (nanometers). Every use, the switch to open the instrument that is set to "ON", the reading on the LCD display is "0" mj / cm2 (mJ / cm), if not the particularity of use, please each previous measurements, readings zero. If your craft special needs, you can also be measured repeatedly, each time after reading the measurement does not require zero treatment, then the reading on the instrument display last accumulated value will be repeatedly measured. Upon completion of the measurement, the need to switch to the "OFF" position in order to close the instrument, the correct operation of the instrument will effectively extend battery life. ■ Technical data: spectral range: UV 250-410nm (nanometers) light intensity range: 0-5,00 0 mW / cm2 (milliwatts / square cm) Measuring range: 0-999,999 mJ / cm2 (mJ / cm) with power: lithium battery 3.6V Power consumption: about 10,000 hours Battery life: one year under normal operating conditions Dimensions: Disc-type structure, a diameter of 140mm (mm), height 13mm (mm) Weight: 450g (g) Environment Temperature: 0-70 ℃ (degrees Celsius) withstand temperature: 110 ℃ (degrees Celsius) under continuous irradiation conditions do not exceed the 10s (seconds) calibration cycle: It is recommended calibration cycle of one year. Warranty: one year from date of purchase warranty, except for damage caused by human factors and the positive side, Shenzhen Science and Technology Co., Ltd. Main moisture meter, infrared detector, gas detector, UV energy meter, light transmittance meter, gloss meter, colorimeter, coating thickness, endoscopy, mechanical testing equipment, and other instruments Tel: 17704058808 (Wong) 0755-85250503 QQ: 2606415325 Log http://www.fanghezheng.com Learn more